Set up Wi-Fi on Skyworth GN542VF

  1. Type 192.168.1.1 and press Enter, User = admin, Password = enter letters as shown below and then press Login
  2. Go to Network
  3. At WLAN 2.4G and set up as follows:
    • Enable : enable-disable Wi-Fi network
    • Mode : choose Mode, by default is 802.11b/g/n
    • Channel : choose Wi-Fi channel, by default is Auto
    • SSID : Wi-Fi network name
    • Bandwidth (MHz)  : by default is 20
    • Associate Number : number of connected device, maximum 32 devices
    • SSID Enable : enable-disable Wi-Fi network name
    • RF Output Power : by default is Standard
    • WPS Enable : enable-disable WPS
    • WPS Mode : choose Mode of WPS
    • Security Setting : choose Wi-Fi security type
    • Pre-Shared Key (PSK) : Wi-Fi password
  4. Select WLAN 5G and set up as follows:
    • Enable  : enable-disable Wi-Fi network
    • Mode : choose Mode, by default is 802.11a/n/ac
    • Channel : choose Wi-Fi channel, by default is Auto
    • SSID : Wi-Fi network name
    • Bandwidth (MHz) : by default is 80
    • Associate Number  : number of connected device, maximum 32 devices
    • SSID Enable : enable-disable Wi-Fi network name
    • RF Output Power : by default is Standard
    • WPS Enable : enable-disable WPS
    • WPS Mode : choose Mode of WPS
    • Security Setting : choose Wi-Fi security type
    • Pre-Shared Key (PSK) : Wi-Fi password