Set up Wireless for AP TP-Link Archer C9

  1. Log in
    • Type 192.168.0.1 in the Address bar on Browser then press Enter, Username = admin, Password = admin and press Login
  2. Basic setting > Go to Basic > Wireless
    • Wireless 2.4GHz, 5GHz : select ON
    • Network Name(SSID) : enter name as desired
    • Password : set password using 8 characters up (for Wireless Basic Setup it’ll be encrypted by WPA/WPA2 Personal)
    • Hide SSID : to hide SSID name, tick a check at this, to show name, make it blank
    • Once completed, press Save
  3. Wireless 2.4GHz : Advanced
    • Wireless Settings
      • Wireless Network Name : enter name as desired
      • Mode : select preferred Mode (default is 11bgn mixed)
      • Channel Width : choose the width of Channel 
      • Channel : choose preferred Channel 
      • Enable SSID Broadcast : tick a check mark (to hide SSID, remove a check mark)
      • Enable WDS Bridging : leave it blank
      • Once completed, press Save
    • WPS
      • WPS Status : Enabled, to disable press Disable WPS
      • WPS Status : Disabled, to enable press Enable WPS
      • Current PIN : is PIN code to be used with device supporting WPS PIN e.g. Windows 7-10 on Windows screen, it’ll show options to enter PIN or to push WPS button at AP TP-Link
      • If it is Smart Phone select WPS Push Button and push WPS button at the back of AP TP-Link 1 time only, both devices will automatically connect each other
    • Wireless Security
      • Disable Security
      • WPA / WPA2 – Personal
      • WPA / WAPA2 – Enterprise
      • WEP
  4. Wireless 5GHz : Advanced
    • Wireless Settings
      • Wireless Network Name : enter name as desired
      • Mode : select preferred Mode (default is 11a/n/ac mixed)
      • Channel Width : choose the width of Channel
      • Channel :  choose preferred Channel
      • Enable SSID Broadcast : tick a check mark (to hide SSID name, remove a check mark)
      • Enable WDS Bridging : leave it blank
      • Once completed, press Save
    • WPS
      • WPS Status : Enabled, to disable press Disable WPS
      • WPS Status : Disabled, to enable press Enable WPS
      • Current PIN : is PIN code to be used with device supporting WPS PIN e.g. Windows 7-10 on Windows screen, it’ll show options to enter PIN or to push WPS button at AP TP-Link
      • If it is Smart Phone, select WPS Push Button and push WPS button at the back of AP TP-Link 1 time only, both devices will automatically connect each other
    • Wireless Security
      • Disable Security
      • WPA / WPA2 – Personal
      • WPA / WAPA2 – Enterprise
      • WEP