Set up Wireless for AP Humax Quantum T3A

  1. Enter AP Setting from a browser
    • If not yet connect main Router, type 192.168.1.1 or http://dearmyrouter.net
    • If connect main Gateway Router 192.168.1.1, type 192.168.0.1
    • ID: admin / Password: Enter the last 4 digits of the serial number
  2. Select [Advanced Setup]
  3. Connection Status 
  4. Select [Wireless 5GHz]  > [Primary Network]
    • [Radio On/Off] : enable or disable Wireless
    • [Network Name (SSID)] : enter Wireless network name
    • [802.11 Mode] : set up Wireless technology mode (802.11/A/N/AC - recommended)
    • [Hide SSID] : hide or display Wireless network name
    • [Channel] : set up Wireless Channel (Auto- recommended)
    • [Bandwidth] : set up Wireless bandwidth (Auto- recommended)
    • [Security] : set up Wireless security type
      • WPA-PSK, WPA2-PSK, WPA/WPA2-PSK, : enter 8 digits up
      • WEP- enable, WEP uses mutual key : enter 5 or 10 digits
    • [Encryption] : select Wireless encryption
    • [Password] : enter the password
  5. Select [Wireless 2.4GHz]  > [Primary Network]
    • [Radio On/Off] : enable or disable Wireless
    • [Network Name (SSID)] : enter Wireless network name
    • [802.11 Mode] : set up Wireless technology mode (802.11/A/N/AC - recommended)
    • [Hide SSID] : hide or display Wireless network name
    • [Channel] : set up Wireless Channel (Auto- recommended)
    • [Bandwidth] : set up Wireless bandwidth (Auto- recommended)
    • [Security] : set up Wireless security type
      • WPA-PSK, WPA2-PSK, WPA/WPA2-PSK : enter 8 digits up
      • WEP- enable, WEP uses mutual key : enter 5 or 10 digits
    • [Encryption] : select Wireless encryption
    • [Password] : enter the password