How to set up Wireless Security for Technicolor TC7200 and TC7200.20

  1. Open a Browser and type http://192.168.0.1 in the Address bar, leave blank at Username and enter Password = admin then click OK
  2. Wireless > Radio check following values:
    • Interface -> enable – disable Wireless
  3. Primary Network for setting SSID Security of Wireless
    • Network Name (SSID) > Wireless signal
    • Set up Wireless as below
    • This Router model has no Hide SSID but can set Closed Network
  4. WEP
    • Primary Network: select Disable at WPA-PSK and WPA2-PSK
    • WEP Encryption > select to use Security WEP (64-bit) or WEP (128-bit)
    • Network Key > set the password to use Wireless 
    • When finish, click Apply to Save
  5. WPA-PSK, WPA2-PSK
    • Primary Network: select Disable at WEP Encription first
    • If use only WPA-PSK: select Disable at WPA2-PSK
    • If use only WPA2-PSK: select Disable at WPA-PSK
    • If use both WPA-PSK and WPA2-PSK: select Enable both (both set Enable by default)
    • WPA Pre-Shared Key > set the password to use Wireless 
    • When finish, click Apply to Save